网站导航

GE WESDAC D20 PS CPU模块 全新原装

当前位置:主页 > 产品展示 > 通用电气 GE

GE WESDAC D20 PS CPU模块 全新原装

型号: GE WESDAC D20 PS

分类: 通用电气 GE

联系人:何经理

手机:13313705507

QQ:2235954483

邮箱:2235954483@qq.com

地址:厦门市思明区吕岭路1733号万科创想中心2009室

详细介绍

VMVME-7807/VME-7807RCGE Fanuc嵌入式系统公司的先进单板计算机(SBC)。这些SBC基于Pentium®M架构构建,设计为适合单插槽、被动冷却、VME欧洲卡外形,使其适用于各种嵌入式和工业应用。

 

主要特点:

 

内存:支持高达1.5GBDDR SDRAM,其中1.0GB通过SODIMM连接,可选512MB焊接内存。

 

视频:包括用于前面板连接的内置SVGA和用于后部I/O的数字视频控制器,具有DVI-D双头显示功能。

 

网络:提供10/100 Mbit以太网和双千兆以太网,可在前面板或后I/O上连接。

 

存储:通过后部I/O支持串行ATASATA)和Ultra IDE驱动器。

 

接口:具有串行端口(COM1)、键盘/鼠标端口和可选的P0,带VITA 31.1接口,可增强连接。

其他功能:包括实时时钟/日历、前面板重置开关、微型扬声器,并能够运行Windows XPWindows 2000和各种Linux发行版等桌面操作系统。

 

这种功能组合使VMVME-7807/VME-7807RC成为紧凑型工业外形中需要可靠桌面级性能的应用程序的强大解决方案。

GE WESDAC D20 PS CPU模块  全新原装

 

The modern energy storage system of lithium-ion batteries has been widely adopted in various applications due to its efficient and reliable performance. However, ensuring the safety and stability of the system requires strict monitoring of each battery unit to prevent battery imbalance, overcharging, deep discharge, or overheating. To achieve this goal, it is necessary to provide independent isolated power supply voltage control circuits for each battery unit or battery array.
For battery arrays with a nominal voltage of up to 48V, standard industrial DC/DC power converter modules that provide 500V or 1600V isolation barriers can usually be used. However, for systems that require higher power and are connected to AC power sources, the battery array voltage may reach 600-800V, which requires solutions with higher isolation barriers.
Low isolation capacitance enhances noise resistance
The P-DUKE medical power converter series has a 5kV isolation barrier, exceeding the conventional requirement of 4kV. In this project, MPD30-24S12 was selected, which can generate the necessary 12V/30W power voltage from the common 24V DC bus.
The input and output capacitance of a typical industrial 30W DC/DC power converter can reach 1500pF. If up to 200 converters are used in parallel, the total capacitance between the battery unit (connected to the AC grid through a charger) and the 24V bus may reach 300nF, resulting in an AC leakage current exceeding 20mA. A current exceeding 10mA may cause serious electric shock and accidents.
The input and output capacitance of MPD30-24S12 is only 20pF, so the total capacitance after 200 converters are connected in parallel is only 4nF, and the leakage current is less than 1mA. This low capacitance also avoids transient or any noise coupling from the AC/battery side converter to the sensitive communication signal of the central battery management system.
Through this solution, the requirements for 4kV isolation and low leakage current have been well met.
Communication and Power Solutions
For communication throughout the installation, the central BMS controller uses a WiFi router and is powered by a 25W 53V power supply via Ethernet. According to the final installation, the power supply voltage can be generated by a 230Vac main power supply or an internal 24Vdc bus. For 230Vac, TSD30 series converters can be used. It also offers a Din rail version for easy installation in the controller rack.
Successful cases have shown that the RCD30 series converter can generate a 53V voltage from the 24Vdc bus and adjust the output from 54V to 53V. It also comes with an integrated heat sink for easy cooling.
P-DUKE product application
The MPD30/MPD30W series is a series of 30W DC/DC power converters with enhanced 5000Vac isolation voltage, which meets the requirements of medical applications. This series has different input voltage ranges and provides single or dual output. This series complies with the 2MOPP standard, with an electrical clearance and creepage distance of 8 millimeters. This makes them suitable not only for medical devices, but also for other applications that require high isolation and extremely low input/output capacitance.
The TSD30 series is a ready to use AC/DC solution suitable for Din rail applications. Like the RCD30W series, it provides different output voltages and installation options for various applications.
GE WESDAC D20 PS CPU模块  全新原装


推荐产品

如果您有任何问题,请跟我们联系!

联系我们

Copyright © 2002-2020 厦门雄霸电子商务有限公司 版权所有

闽公网安备 35020302034927号

备案号:闽ICP备14012685号

地址:厦门市思明区吕岭路1733号万科创想中心2009室

在线客服 联系方式 二维码

服务热线

13313705507

扫一扫,关注我们