3500/15交流和直流电源设计为专为3500系列机械保护系统设计的半高模块。这些模块必须安装在机架左侧的指定插槽中，机架可以容纳一个或两个交流和直流任意组合的电源。

主要特点：

电源配置：可以在机架中安装一个或两个电源，其中任何一个都可以独立为机架完全供电。

主电源和备用电源：安装两个电源时，下插槽中的一个用作主电源，而上插槽中的另一个用作备用电源。如果主电源发生故障，备份将自动接管。

热插拔：只要机架中有第二个电源可用，就可以在不中断系统运行的情况下卸下或插入电源。

电压灵活性：这些电源可接受各种输入电压，然后将其转换为3500系统模块所需的适当电压。

可用电源类型：

通用交流电源

高压直流电源

低压直流电源

这种设计确保了冗余和灵活性，有助于3500机架系统的整体可靠性。

The 3500/15 AC and DC Power Supplies are designed as half-height modules specifically for the 3500 Series Machinery Protection System. These modules must be installed in designated slots on the left side of the rack, and the rack can accommodate one or two power supplies in any combination of AC and DC.

 

Key Features:

Power Supply Configuration: You can install one or two power supplies in the rack, and either one can fully power the rack independently.

Primary and Backup Power: When two power supplies are installed, the one in the lower slot functions as the primary supply, while the one in the upper slot serves as the backup. The backup takes over automatically if the primary power supply fails.

Hot-Swappable: The power supplies can be removed or inserted without interrupting the operation of the system, provided that a second supply is available in the rack.

Voltage Flexibility: These power supplies accept a wide range of input voltages, which are then converted to the appropriate voltages required by the 3500 system modules.

Available Power Supply Types:

Universal AC Power

High Voltage DC Power Supply

Low Voltage DC Power Supply

This design ensures redundancy and flexibility, contributing to the overall reliability of the 3500 rack system.